- 304 grade stainless steel construction
- Intralox S2400 flush grid polypropylene blue 596mm width food grade plastic modular belting
- 42% open area belt for improved liquid drain through
- Box section underframe support structure complete with tubular cross braces
- Support structure on conveyor infeed side
- Designed to butt up to wall through-hole
- Robust streamline design with good access for routine cleaning and maintenance procedures
- Lift off stainless steel tunnel hood for ease of access / maintenance complete with curtains to each end
- 350mm cantilevered roller track infeed and outfeed
- All legs complete with adjustable feet and bolt down facility
- End Drive - SEW motor/gearbox to IP65 standard complete with stainless steel motor cover
- Motor/control panel to IP65 standard, side mounted at infeed end complete with all necessary electrics including stop/start, door interlocked motorised isolator, emergency stop, pump and belt speed control, tank re-circulate or to drain control
- 240V single phase at 50Hz panel supply
- 240V 3 phase supply to variable speed belt drive motor
- Nominal 10 metres/minute
- 240V 3 phase supply to variable speed pump drive motor
- SY type cable to be run to motor from panel
- Remote emergency stop button
- Reservoir water level float switch
- Inlet water solenoid valves
- Stainless steel 1000mm long covered spray area, 360 degree loop spray nozzle-set
- Maximum product clearance through nozzle-set - 575mm wide x 480mm high
- Slide out stainless steel undertrays - liquid to cascade to recirculation catchment tank fitted with outlet valve and high and low level float switches
- Compact design includes centrifugal water pump, filter housing and cartridge and Dosatron, all mounted to conveyor main body
- Facility for chemical container storage under conveyor at infeed end
- Conveyor infeed/discharge rollers of 65mm diameter over belt
- Belt quick release mechanism for improved belt and nozzle-set access
- Stainless steel full width return rollers
- Hex head with nyloc fixings used throughout
- Fully assembled and tested prior to despatch
- Complete with all necessary CE documentation
- Excludes connection of services and drains
- Optional Extras:
- Infeed/outfeed tables
- Belt reverse feature
- Catchment tank agitation facility
|